Internet of Things (IoT) & Embedded Systems Architecture
Edge AI on Microcontrollers
TinyML runs small models directly on microcontrollers, enabling vibration, audio, and vision inference without sending raw data to the cloud. The constraints are severe: kilobytes of RAM, limited compute, and tight power budgets. Success comes from model design and quantization, not from porting a large model downward.
Punti chiave
- Start from the sensor and label quality, since model architecture cannot fix bad data.
- Quantize models to int8 and measure accuracy loss against the original.
- Profile RAM and flash early, including the runtime and operator overhead.
- Use hardware acceleration where the silicon provides it, such as DSP or NPU blocks.
- Design for on-device confidence thresholds and fallback behavior.
- Test inference under temperature and voltage variation, not only on the bench.
- Version models and datasets so field behavior can be reproduced.
- Measure energy per inference, which often matters more than latency.
Domande frequenti
Can a microcontroller run a neural network?
Yes, small quantized models run comfortably on modern MCUs.
How much accuracy is lost with quantization?
Usually a small amount, but it depends on the model and calibration data.
Do I need a specialized framework?
TensorFlow Lite for Microcontrollers and vendor toolchains cover most cases.
When should inference stay in the cloud?
When models are large, data is rich, or accuracy requirements exceed what the device can support.
Come Kinetikatech aiuta con internet of things (iot) & embedded systems architecture
Il punto è semplice: Edge gateways, real-time operating systems, signed firmware updates, and power budgets, the engineering that keeps constrained devices correct for years without a technician on site. Lo affidi al nostro servizio Gestione server e Sicurezza server Linux ed è coperto: valutato come si deve, implementato in modo pulito, monitorato 24 ore su 24.